Can't flash NK.bin

Apr 17, 2010 at 4:07 PM

Hi. I followed all steps to write NK.bin to nand. I flashed TIEVM3530-nand.raw, EBOOTNAND.bin. But when I try to flash NK.bin it loads to RAM and not to FLASH.

I have loaded NK.bin as solution in VS2005. After connect to target my log is following:

Download file information:                                                     
[0]: Address=0x84001000  Length=0x001584a4  Save=0x80001000                    
Download file type: 1                                                          
ImageStart = 0x84001000, ImageLength = 0x1584A4, LaunchAddr = 0x8400EBFC       
Completed file(s):                                                             
[0]: Address=0x84001000  Length=0x1584A4  Name="" Target=RAM                   
ROMHDR at Address 84001044h                                                    
Got EDBG_CMD_JUMPIMG                                                           
Got EDBG_CMD_CONFIG, flags:0x00000000                                          
Launch Windows CE image by jumping to 0x8000ebfc...                            
Windows CE Kernel for ARM (Thumb Enabled) Built on Sep 25 2009 at 11:04:23     
--- High Performance Frequecy is 32768 khz---

Apr 17, 2010 at 5:14 PM

I have flashed NK.bin finally. I have opened my entire workspace (where I build NK.bin) and selected in build options IMGFLASH=1. When I connect to target - image flashed.