USBfn RNDIS KITL connection issue when running NK.bin from NAND

Issue: USBfn RNDIS KITL will not connect when booting from NAND based NK.bin image. Post flash based NK.bin, USBfn RNDIS KITL will connect fine. Subsequent reboots will not.   Repro steps:   EBO...

Id #16067 | Release: None | Updated: Feb 13, 2013 at 10:37 PM by joelw | Created: Jan 23, 2010 at 4:48 PM by joelw

SDHC1 reg key "BaseClockFrequency" does not affect SD clock value

This registry key is not overriding the SD clock:   [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SDHC1] "BaseClockFrequency"=dword:16e3600 ; override the max clock rate (24 MHz default)   With this key dis...

Id #14818 | Release: None | Updated: Feb 13, 2013 at 10:37 PM by joelw | Created: Nov 14, 2009 at 7:09 PM by joelw

DVI enable GPIO remap

DVI enable pin needs to be remapped. This affects XLDR and EBOOT.

Id #14811 | Release: None | Updated: Feb 13, 2013 at 10:37 PM by rkaplan27 | Created: Nov 14, 2009 at 9:06 AM by joelw

EBOOT DVI test pattern output flickers

With GPIO change in XLDR and EBOOT, DVI is enabled.   On EBOOT startup, DVI display will stay locked for a period of time. After a while the display will start to flicker.

Id #14809 | Release: None | Updated: Feb 13, 2013 at 10:37 PM by rkaplan27 | Created: Nov 14, 2009 at 7:54 AM by joelw

  • 1-4 of 4 Work Items
    • Previous
    • 1
    • Next
    • Showing
    • All
    • Work Items