Flashing WinCE 6 on Beagleboard rev C4

Nov 2, 2012 at 8:15 PM

I've DLd the files from the project site that support eboot based flashing and observed that the ebootnd.nb0 stalls....does not get to the console. 

I'm not sure what could be wrong.

I also have another question...

I'm debugging USB OTG Device mode for WinCE 6...it doesn't appear to work "robustly" specifically when the NAND boot option is selected.  (this is presumably because the USB is not initialized by the boot rom correctly.)

Has anyone discovered a code patch for OTG Phy management (in xloader or the driver) that can be applied to enhance USB OTG fucntionality under the NAND boot option?