This project is read-only.

Required Materials

  1. WinCE 6.00 R2 or newer (eval or full licensed copy) with up to date roll ups. I tested with both R2 and R3.
  2. TI EVM BSP installed
  3. Beagle Board. Note I used a B7 version for these steps, C2+ should work fine.
  4. RS-232 cable. I took an old PC RS-232 slot, and re-soldered DB-9 side to match Beagle Board pin-out
  5. SD Card. I use a SanDisk 512MB SD card when working with the BeageBoard
  6. Software download from this project site

Last edited Nov 18, 2009 at 2:16 AM by joelw, version 2


No comments yet.